10/10/2004 12:00 Front Panel Repair [Body]
Things have really been kicked up a notch, BAM!
Everything that needs to be filled has been filled with BOG. Not all places have had quite enough applied, but they are getting there. Of recent success was the filling of the fist-sized dent in the front corner.
I initially thought I may be able to drill and pull the dent. Without a slide hammer this proved to be impossible. It was also probably a bad move as drilling the panel has provided a potential source of rust. However, I've done everything (clean, prep, paint, etc...) I can to ensure that this will not be the case.
After filling the dent with BOG we sanded it back and have primed the surface. As you can see from the photos, it looks pretty good!